1961 to 1967 Econoline Stainless Flooring Scuff Plates
Click To Enlarge

Zombie Performance Fabrication 61 to 67 Econoline and EPUP Stainless Steel Flooring Scuff Plates.

These handmade stainless steel flooring scuff plates will add a touch of class and protect the flooring in any of your door openings. 

All Zombie Performance Fabication scuff plates are made from 20g 304 stainless steel and come with #8 stainless steel sheetmetal screws (*oversized* #10 screws are optional. just put a note when ordering). Each plate is formed to the factory floor corner and uses raised beads and dimpled mounting screw holes for addes rigidity and protection along with adding a custom look to the interior of you van or pickup.

Each Kit will do two doors or one door opening. (ie. Driver/Passenger kit will do driver door and passenger door. 1qty Side/Back door kit will do one front and one back door of the same door opening)

Each Scuff plate is raw 304 stainless. You can polish or brush these to your desire or just leave them raw for a natural look. They will not rust, so they can be polished or brushed to look like new over time.

 Driver and Passenger Door Kit: $65
-Kit contains two stainless scuff plates and oversized stainless mounting screws. This kit replaces your old, thin factory aluminum scuff plates and mounts into the facotry location. These Plates are thicker, stronger, and wider than the factory plates.

* Note: Choose between #8 or over sized #10 sheetmetal screws for mounting. The oversized #10 screws are being offered due to old rusty sheetmetal flooring and the probablility of your factory mounting screws being stripped out. The larger screws will ensure proper tightening of these plates to your old flooring. Take care when instaling the new screws as you old flooring can still be weakend, rusted, or stripped out. If your flooring is in poor condition it may require being repaired before these kits can be installed.
If you are conserned about using over sized hardware it is recomended to use at least #8 screws if your flooring is in excellent condition. #8 screws are NOT provided with these kits. If you would like the #8 screws with your lit please specify in the notes section when ordering

** Factory drilling of your old plates and flooring was probably inconsistant so there may be some slight misalignment when mounting these new plates. The holes drilled in these plates are oversized for the new mounting hardware and should make up for any misalignment. Any further misalignment can be corrected with a gently tapping with a rubber mallet. Any inconsistancy would be due to the factory variance in drilling from one van/truck to another. These kits were built off of my 67 Econoline Van and fit to those specs.

 Side Door/ Back Door Kit: $65 per kit
-Kit contains two stainless steel scuff plates and stainless #10 mounting screws.
-One kit will do either one side door opening or one rear door opening (one plate per door)
* The factory never offered scuff plates for these cargo door openings but these vans could benefit from the addred protection and style. 
** These plates will require you to drill the mounting holes into your flooring as there was never any factory plates installed. Please ensure that your old flooring is in good condition and not rusted out.

 6-Door Kit: $180 ( discount!)
- This kit will do all of the door opening on your factory 6-Door Van.
Contains plates and mounting screws to do your driver and passsenger doors plus the front and rear side doors on one side of the van and the rear door opening.

 8-Door Kit: $245 ( discount! )
- This kit will do all of the door opening on your factory 8-Door Van.
Contains plates and mounting screws to do your driver and passsenger doors, plus the front and rear side doors on BOTH sides of the van and the rear door opening.
‚Äč
 *All kits are handmade and at times may need to be made to order. Please allow about 1 week to process and build your order. Lead times may vary.

  • Item #: Econoline Scuff Plates

1961 to 1967 Econoline Stainless Flooring Scuff Plates

Price: $65.00
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review