|
|
Zombie Performance ALIEN 2-Hole Ignition Cover!
Fits HD 2-hole Timing Covers (EVO, SHOVEL,ETC)
All steel with stainless hardware
Gloss Black Powder Coated front plate with Texture Black Powder coated backing plate.
As always,...MADE IN THE USA!!!
RAW STEEL:
Bare steel finish. Perfect for you to paint, let rust, or send off from chrome plating locally.
BRUSHED 304 STAINLESS:
Bushed stainless finish, will not rust. Easy to clean or polish locally.
MEDIUM BLACK:
Semi Gloss black powdercoating. Our standard black. Easy to maintain and works well with many different shades of blacks.
GLOSS BLACK:
Glossy black with a lot of shine.
DIMPLES:
- For late model HARLEY DAVIDSONS that require the handlebars to be dimpled so that your switch housing wiring harness can exit your hand controls and run EXTERNALLY to the handlebar tubing. This is a standard mod required for MOST late model (evo and newer) Hd motorcycle that did not come with Internal Wiring.
- IF YOUR BARS ARE CURRENTLY INTERNALLY WIRED YOU DO NOT NEED DIMPLES ADDED UNLESS YOU PLAN ON THE NEW BARS HAVING EXTERNAL WIRING.
INTERNAL WIRING:
- For late model HARLEY DAVIDSONS that allows you to run the handlebar wiring INSIDE the handlebar tubing.
- Grip Holes are drilled 6in from the end of the grips. On clamp style bars the center hole is drilled at the bottom of the handlebar centered with where your clamps will mount the handlebars. Riserless Bars will have the holes drilled at the bottom of the uprights above the riser bosses.
- FOR INTERNAL WIRING MODS ON NON-HARLEY DAVIDSON BIKES PLEASE EMAIL ME PRIOR TO PLACING AN ORDER.
- IF YOU CHOOSE TO HAVE YOUR NEW BARS INTERNALLY WIRED, YOU DO NOT NEED DIMPLES ADDED TO THE BARS.
THROTTLE BY WIRE:
- Throttle By Wire (TBW) is for late model HD motorcycles that have an electronic throttle and DO NOT have traditional throttle cables. If your motorcycle has throttle cables you DO NOT need the TBW option
- TBW bars will be set up for internal wiring
- The TBW option is not listed on all handlebar options. If you do not see the TWB option please email me and we can work out the detail PRIOR to placing your order. Not all handlebars can be set up for TBW.
- TBW bars will require part or all of the handlebar to be made from a thinner wall tubing to correctly fit the TBW sensor.
- Handlebars set up for TBW will be 1/2in shorter on the throttle side and be notched to fit your TBW sensor.
- TBW bars are NOT prewired.
KNURLING:
-Knurling is a texturing added to the handlebars to help against the bars slipping in your clamps. Most motorcycle manufactures use knurling on OEM bars. This is an OPTIONAL mod you can add to your bars if you prefer to have the knurling. Knurling is offered in the following spacing:
3.5in center to center for standard HD hydraulic front ends
4.75in center to center for most OEM HD springers
100mm for Metric Bikes such as Honda Shadow 750's or Yamaha XS650s
114mm for Honda Shadow 600s
*IF YOU REQUIRE A DIFFERENT KNURLING SPACING PLEASE EMAIL ME PRIOR TO PLACING AND ORDER.
